Mumble SuperUser и другие Администраторы

задавайте Ваши вопросы
Правила форума
СНАЧАЛА ПОЛЬЗУЙТЕСЬ ПОИСКОМ!!!

При обращении просим Вас сразу указывать:
Вашу ОСь? Видео? Звук? DirectX? Логи Мамбл, Мурмур?
Это поможет быстрей и более точно ответить на Ваши вопросы.
Jl0BuT0n0p
Сообщения: 4
Зарегистрирован: 22 сен 2013, 14:33

Re: Mumble и настройка готового сервера

Сообщение Jl0BuT0n0p »

По началу этой темы уже понятно что админ-права уже выставлены, а у меня их нет и не знаю как их себе присвоить. Все вкладки групп типа "Редактировать", "Добавить" и т.п. у меня не доступны.

Jl0BuT0n0p
Сообщения: 4
Зарегистрирован: 22 сен 2013, 14:33

Re: Mumble и настройка готового сервера

Сообщение Jl0BuT0n0p »

niknikto писал(а):Что мы будем делать
Во-первых, нам необходимо создать пароль для суперпользователя (SuperUser). Если вы еще не сделали этого, то вы можете сделать это, набрав в консоли/командной строке следующие:

Код: Выделить всё

murmur -ini /path/to/murmur.ini -supw ваш_пароль
У меня мурмур в трее выдает либо закрытие программы, либо показать логи. Не пойму где открывается консоль сервера?

vomit
Сообщения: 1
Зарегистрирован: 03 апр 2015, 03:07

Не дает пароль SuperUser

Сообщение vomit »

Пытаюсь запустить на локалке. ini отредактировал как по гайду viewtopic.php?p=8#p8 . Выдает такое вод в консоли и не дает пароль SuperUser. что не так? вот ini

Код: Выделить всё

# Murmur configuration file.
#
# General notes:
# * Settings in this file are default settings and many of them can be overridden
#   with virtual server specific configuration via the Ice or DBus interface.
# * Due to the way this configuration file is read some rules have to be
#   followed when specifying variable values (as in variable = value):
#     * Make sure to quote the value when using commas in strings or passwords.
#        NOT variable = super,secret BUT variable = "super,secret"
#     * Make sure to escape special characters like '\' or '"' correctly
#        NOT variable = """ BUT variable = "\""
#        NOT regex = \w* BUT regex = \\w*

# Path to database. If blank, will search for
# murmur.sqlite in default locations or create it if not found.
database=

# If you wish to use something other than SQLite, you'll need to set the name
# of the database above, and also uncomment the below.
# Sticking with SQLite is strongly recommended, as it's the most well tested
# and by far the fastest solution.
#
#dbDriver=QMYSQL
#dbUsername=
#dbPassword=
#dbHost=
#dbPort=
#dbPrefix=murmur_
#dbOpts=

# Murmur defaults to not using D-Bus. If you wish to use dbus, which is one of the
# RPC methods available in Murmur, please specify so here.
#
dbus=session

# Alternate D-Bus service name. Only use if you are running distinct
# murmurd processes connected to the same D-Bus daemon.
#dbusservice=net.sourceforge.mumble.murmur

# If you want to use ZeroC Ice to communicate with Murmur, you need
# to specify the endpoint to use. Since there is no authentication
# with ICE, you should only use it if you trust all the users who have
# shell access to your machine.
# Please see the ICE documentation on how to specify endpoints.
#ice="tcp -h 127.0.0.1 -p 6502"

# Ice primarily uses local sockets. This means anyone who has a
# user account on your machine can connect to the Ice services.
# You can set a plaintext "secret" on the Ice connection, and
# any script attempting to access must then have this secret
# (as context with name "secret").
# Access is split in read (look only) and write (modify) 
# operations. Write access always includes read access,
# unless read is explicitly denied (see note below).
#
# Note that if this is uncommented and with empty content,
# access will be denied.

#icesecretread=
icesecretwrite=

# How many login attempts do we tolerate from one IP
# inside a given timeframe before we ban the connection?
# Note that this is global (shared between all virtual servers), and that
# it counts both successfull and unsuccessfull connection attempts.
# Set either Attempts or Timeframe to 0 to disable.
#autobanAttempts = 10
#autobanTimeframe = 120
#autobanTime = 300

# Specifies the file Murmur should log to. By default, Murmur
# logs to the file 'murmur.log'. If you leave this field blank
# on Unix-like systems, Murmur will force itself into foreground
# mode which logs to the console.
#logfile=murmur.log

# If set, Murmur will write its process ID to this file
# when running in daemon mode (when the -fg flag is not
# specified on the command line). Only available on
# Unix-like systems.
#pidfile=

# The below will be used as defaults for new configured servers.
# If you're just running one server (the default), it's easier to
# configure it here than through D-Bus or Ice.
#
# Welcome message sent to clients when they connect.
welcometext="<br />Привтсвем на сервере C'est La Vie<b>Murmur</b>.<br />Удачи!<br />"

# Port to bind TCP and UDP sockets to.
port=64738

# Specific IP or hostname to bind to.
# If this is left blank (default), Murmur will bind to all available addresses.
host=127.0.0.1

# Password to join server.
serverpassword=

# Maximum bandwidth (in bits per second) clients are allowed
# to send speech at.
bandwidth=192000

# Maximum number of concurrent clients allowed.
users=500

# Amount of users with Opus support needed to force Opus usage, in percent.
# 0 = Always enable Opus, 100 = enable Opus if it's supported by all clients.
#opusthreshold=100

# Maximum depth of channel nesting. Note that some databases like MySQL using
# InnoDB will fail when operating on deeply nested channels.
#channelnestinglimit=10

# Regular expression used to validate channel names.
# (Note that you have to escape backslashes with \ )
channelname=[ \\-=\\w\\#\\[\\]\\{\\}\\(\\)\\@\\|]+

# Regular expression used to validate user names.
# (Note that you have to escape backslashes with \ )
username=[-=\\w\\[\\]\\{\\}\\(\\)\\@\\|\\.]+

# Maximum length of text messages in characters. 0 for no limit.
textmessagelength=0

# Maximum length of text messages in characters, with image data. 0 for no limit.
#imagemessagelength=131072
imagemessagelength=0

# Allow clients to use HTML in messages, user comments and channel descriptions?
allowhtml=true

# Murmur retains the per-server log entries in an internal database which
# allows it to be accessed over D-Bus/ICE.
# How many days should such entries be kept?
# Set to 0 to keep forever, or -1 to disable logging to the DB.
#logdays=31

# To enable public server registration, the serverpassword must be blank, and
# this must all be filled out.
# The password here is used to create a registry for the server name; subsequent
# updates will need the same password. Don't lose your password.
# The URL is your own website, and only set the registerHostname for static IP
# addresses.
# Only uncomment the 'registerName' parameter if you wish to give your "Root" channel a custom name.
#
registerName=CLV server
#registerPassword=secret
registerUrl=http://127.0.0.1/
registerHostname=Test

# If this option is enabled, the server will announce its presence via the 
# bonjour service discovery protocol. To change the name announced by bonjour
# adjust the registerName variable.
# See http://developer.apple.com/networking/bonjour/index.html for more information
# about bonjour.
bonjour=True

# If you have a proper SSL certificate, you can provide the filenames here.
# Otherwise, Murmur will create it's own certificate automatically.
#sslCert=
#sslKey=

# If Murmur is started as root, which user should it switch to?
# This option is ignored if Murmur isn't started with root privileges.
#uname=

# If this options is enabled, only clients which have a certificate are allowed
# to connect.
certrequired=True

# If enabled, clients are sent information about the servers version and operating
# system.
#sendversion=True

# You can configure any of the configuration options for Ice here. We recommend
# leave the defaults as they are.
# Please note that this section has to be last in the configuration file.
#
[Ice]
Ice.Warn.UnknownProperties=1
Ice.MessageSizeMax=65536

iUser1
Сообщения: 17
Зарегистрирован: 05 сен 2013, 11:59
Благодарил (а): 2 раза
Поблагодарили: 3 раза

Re: Не дает пароль SuperUser

Сообщение iUser1 »

vomit писал(а):Пытаюсь запустить на локалке. ini отредактировал как по гайду viewtopic.php?p=8#p8 . Выдает такое вод в консоли и не дает пароль SuperUser. что не так? вот ini
certrequired=true с какой целью?
icesecretwrite= пароль на управление сервером пустой, ну это как бы риск, но если хочешь острых ощущений, то ладно.

Aryta
Сообщения: 2
Зарегистрирован: 22 май 2015, 01:27

Проблема с паролем(админ)

Сообщение Aryta »

Здравствуйте . у меня большая проблема. хотелось бы,что бы мне помогли советом. потерял свой пароль от админки(супер юзер) в канале мамбл. как его можно восстановить ? с учетом того, что я не помню на какой из 2 своих почт я регистрировался. Из за того,что очень давно это было и я нигде не записал . готов выслать любую информацию Администрации для востонавления пароля. не хотелось бы заново создавать

iUser1
Сообщения: 17
Зарегистрирован: 05 сен 2013, 11:59
Благодарил (а): 2 раза
Поблагодарили: 3 раза

Re: Проблема с паролем(админ)

Сообщение iUser1 »

Написал бы на каком хостинге канал мамблы твой... И лучше в саппорт этого хостинга писать а не тут.

B0nuse
Site Admin
Сообщения: 1588
Зарегистрирован: 27 июл 2009, 08:58
Благодарил (а): 40 раз
Поблагодарили: 363 раза
Контактная информация:

Re: Проблема с паролем(админ)

Сообщение B0nuse »

На арендованном у нас - с помощью Администрации по запросу в ЛС.
На арендованном у других хостеров - с помощью Администрации соответствующего проекта.
На собственном - самостоятельно.
Мы в Telegramm https://t.me/mumbleru
Пожалуйста, при персональном обращении сразу формулируйте его цель. Спасибо.
Подпишитесь на Новости форума feed/news :rtfm:

Изображение <--- Хочешь себе такой? Читай тут

Aryta
Сообщения: 2
Зарегистрирован: 22 май 2015, 01:27

Re: Проблема с паролем(админ)

Сообщение Aryta »

я отписал Вам в ЛС, ответа ждать когда?

B0nuse
Site Admin
Сообщения: 1588
Зарегистрирован: 27 июл 2009, 08:58
Благодарил (а): 40 раз
Поблагодарили: 363 раза
Контактная информация:

Re: Проблема с паролем(админ)

Сообщение B0nuse »

Мы ничего от Вас не получили. Пожалуйста, проверьте свое сообщение и укажите ссылку на него.
Мы в Telegramm https://t.me/mumbleru
Пожалуйста, при персональном обращении сразу формулируйте его цель. Спасибо.
Подпишитесь на Новости форума feed/news :rtfm:

Изображение <--- Хочешь себе такой? Читай тут

PetrV
Сообщения: 1
Зарегистрирован: 14 июн 2015, 13:16

смена пароля у SuperUser

Сообщение PetrV »

Как поменять пароль у SuperUser и название сервера?

Ответить